Beam Deflection and Bending Calculator

This beam deflection calculator checks how much a beam bends and how hard it is working. Choose simply supported or cantilever, a point or uniform load, the span and the material — steel, aluminium, timber, concrete — and the section: solid rectangle, round bar, tube, box section or your own I value. It shows the maximum deflection and span-to-deflection ratio against your limit, the maximum bending moment and shear, and the bending stress. Compare joist sizes from a CSV. It runs in your browser.

Standard beam formulas

CaseMax deflectionMax moment
Simply supported, centre point PPL³/48EIPL/4
Simply supported, uniform w5wL⁴/384EIwL²/8
Cantilever, end point PPL³/3EIPL
Cantilever, uniform wwL⁴/8EIwL²/2

When to use it

  1. Check a timber floor joist's deflection.
  2. Size a steel shelf bracket or cantilever.
  3. Compare joist depths for a span.
  4. Check a lintel over an opening.
  5. Teach beam theory with real numbers.

How to Use

  1. Choose the support and load case.
  2. Enter the load, span and material.
  3. Choose the section and its dimensions.
  4. Read deflection, moment and stress; paste sections to compare.

Features

  1. Four standard beam cases
  2. Rectangle, round, tube, box or custom
  3. Deflection vs span limit
  4. Moment, shear and stress
  5. Material presets
  6. Batch CSV
  7. 100% client-side

FAQs

What deflection is acceptable?

Common limits are span/360 for floors, span/250 for general members and span/180 for cantilevers or roofs.

What units should I use?

Loads in newtons (N/mm for uniform loads, which equals kN/m), lengths in mm and E in GPa.

Does it include the beam's own weight?

No. Add self-weight to the uniform load.

Is this a structural design?

No. It's a quick check; design to your local structural code with proper load factors.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Maximum deflection and moment for four standard cases: simply supported with a centre point load (δ = PL³/48EI, M = PL/4), simply supported with a uniform load (δ = 5wL⁴/384EI, M = wL²/8), cantilever with an end load (δ = PL³/3EI, M = PL) and cantilever with a uniform load (δ = wL⁴/8EI, M = wL²/2). Second moment of area I and extreme fibre distance c come from the section: rectangle bh³/12, round πd⁴/64, tube π(D⁴ − d⁴)/64, rectangular hollow, or custom. Bending stress = M·c/I. Deflection is compared with a span limit such as L/360.

Calculators & Converters

Calculators & Converters

  • Bolt Torque and Preload Calculator
  • Tap Drill and Thread Chart
  • ISO Fits and Tolerances Calculator
  • Spur Gear Calculator
  • Pulley and Belt Calculator
  • Spring Rate Calculator
  • Hydraulic Cylinder Force Calculator
  • Pipe Flow and Pressure Drop Calculator