This pump power calculator works out how much power a pump needs and what it costs to run. Enter the flow, total head, pump and motor efficiencies and the fluid density, and it gives the hydraulic, shaft and electrical power, a suggested motor size and the yearly energy and cost. A speed slider shows what a variable-speed drive would save using the affinity laws. Paste several pump options to compare them. It runs in your browser.
| Flow | Head | Shaft kW | Input kW |
|---|---|---|---|
| 2 L/s | 20 m | 0.52 | 0.58 |
| 5 L/s | 30 m | 1.96 | 2.18 |
| 10 L/s | 30 m | 3.92 | 4.35 |
| 20 L/s | 40 m | 10.44 | 11.60 |
| 50 L/s | 25 m | 16.31 | 18.13 |
Power (kW) = flow (m³/s) × head (m) × density × 9.81 ÷ 1,000 ÷ efficiency. 10 L/s at 30 m with 75% efficiency needs 3.9 kW at the shaft.
Head (m) = pressure (kPa) ÷ (density × 9.81 ÷ 1,000); 100 kPa of water is about 10.2 m.
Power falls with the cube of speed: 80% speed uses about 51% of the power.
The next standard size above the shaft power with some margin, checked against the pump curve's maximum.
No. Everything runs in your browser.
Hydraulic power = ρ × g × Q × H. Shaft power = hydraulic power ÷ pump efficiency and electrical input = shaft power ÷ motor efficiency. Head can be entered in metres or feet or converted from a pressure (H = ΔP ÷ ρg). The next standard motor rating at least 10% above shaft power is suggested. Annual energy = input kW × running hours, priced by the tariff. Affinity laws estimate a speed change: flow ∝ N, head ∝ N², power ∝ N³. Batch mode compares pump options.