This gear calculator gives the key dimensions of a spur or helical gear pair from the module (or diametral pitch) and tooth counts. It shows the pitch, outside, root and base diameters of each gear, the centre distance, the ratio, the output speed and the pitch-line speed, plus tooth depth and circular pitch. Paste a multi-stage gear train to see the speed after each stage. It runs in your browser.
| Module | Pitch Ø | Outside Ø | Whole depth | Circular pitch |
|---|---|---|---|---|
| 1 | 20 mm | 22 mm | 2.25 mm | 3.142 mm |
| 1.5 | 30 mm | 33 mm | 3.375 mm | 4.712 mm |
| 2 | 40 mm | 44 mm | 4.5 mm | 6.283 mm |
| 2.5 | 50 mm | 55 mm | 5.625 mm | 7.854 mm |
| 3 | 60 mm | 66 mm | 6.75 mm | 9.425 mm |
| 4 | 80 mm | 88 mm | 9 mm | 12.566 mm |
Module × number of teeth. A 20-tooth gear of module 2 has a 40 mm pitch diameter.
Half the sum of their pitch diameters: m × (z1 + z2) ÷ 2.
Module = 25.4 ÷ DP. DP 10 is about module 2.54.
About 17 for 20° gears without undercut; fewer need profile shift.
No. Everything runs in your browser.
For standard full-depth 20° gears: pitch diameter d = m × z (÷ cos β for helical gears), outside diameter = d + 2m, root diameter = d − 2.5m, base diameter = d × cos 20°, addendum = m, dedendum = 1.25m, whole depth = 2.25m, circular pitch = πm. Centre distance = (d1 + d2) ÷ 2, ratio = z2 ÷ z1 and output speed = input speed × z1 ÷ z2. Module = 25.4 ÷ diametral pitch. Batch mode chains stages so the output speed of each feeds the next.