This tap drill chart gives the right drill for tapping metric and inch threads. Enter any metric diameter and pitch — coarse or fine — to get the tap drill and the thread engagement it produces, and the ISO clearance holes for the matching bolt. Full charts list M3 to M36 coarse threads and the common UNC and UNF sizes with their number, letter or fractional drills. Paste a list of threads from a drawing to get every drill at once. It runs in your browser.
| Thread | Tap drill |
|---|---|
| M3 × 0.5 | 2.5 mm |
| M4 × 0.7 | 3.3 mm |
| M5 × 0.8 | 4.2 mm |
| M6 × 1 | 5 mm |
| M8 × 1.25 | 6.8 mm |
| M10 × 1.5 | 8.5 mm |
| M12 × 1.75 | 10.3 mm |
| 1/4-20 UNC | #7 (0.201 in) |
| 3/8-16 UNC | 5/16 in |
| 1/2-13 UNC | 27/64 in |
8.5 mm for the standard M10 × 1.5 coarse thread; 8.8 mm for M10 × 1.25 fine.
A #7 drill (0.201 in).
Major diameter minus pitch: M6 × 1 → 5 mm.
8.4 mm close, 9 mm medium, 10 mm loose (ISO 273).
No. Everything runs in your browser.
For metric threads the tap drill is the major diameter minus the pitch (M10 × 1.5 → 8.5 mm), giving about 75–80% thread engagement, calculated as 76.98 × (D − drill) ÷ P. Inch threads use the standard 75% tap drills (for example 1/4-20 → #7, 0.201 in), with engagement 76.98 × TPI × (D − drill). Clearance holes follow ISO 273 fine, medium and coarse series. Batch mode reads thread designations such as M10, M10x1.25, 1/4-20 or #10-32.