This gear ratio calculator shows how fast your engine turns at any road speed in every gear. Enter the gearbox ratios, the final drive and the tyre size, and it lists the RPM at your chosen speed, the speed per 1,000 RPM, the geared top speed at redline and where the revs land after each upshift. Use it to check motorway cruising RPM, compare a final-drive swap or bigger tyres, or plan gearing for the track. Speeds work in km/h or mph, and a CSV of gear and speed rows gives the RPM for each. It runs in your browser.
| Gear ratio | Overall | RPM at 100 km/h | km/h per 1,000 rpm |
|---|---|---|---|
| 1.53 | 6.03 | 5,042 | 19.8 |
| 1.22 | 4.81 | 4,020 | 24.9 |
| 1.03 | 4.06 | 3,394 | 29.5 |
| 0.84 | 3.31 | 2,768 | 36.1 |
RPM = speed ÷ tyre circumference × gear ratio × final drive. At 100 km/h a 2,000 mm tyre turns about 833 times a minute; in a 0.84 gear with a 3.94 final drive the engine turns about 2,760 RPM.
The gear ratio multiplied by the final drive ratio — how many times the engine turns for each turn of the wheels.
Tyres run a little smaller than their nominal size under load and wear, and automatic torque converters slip, so real RPM can differ by a few percent.
If you shift at redline, the engine drops to redline × next gear ratio ÷ current ratio. It shows whether you land in the power band.
No. Everything runs in your browser.
The tyre size (metric such as 225/45R17 or flotation such as 31x10.50R15) gives the overall diameter and circumference. Engine RPM = road speed ÷ circumference × gear ratio × final drive; speed per 1,000 RPM and the geared top speed at redline are the inverse. For each gear the table shows the overall ratio, RPM at the chosen speed, speed per 1,000 RPM, top speed at redline and the RPM the engine drops to after an upshift at redline (redline × next ratio ÷ previous ratio). Speeds can be in km/h or mph. Batch mode reads ratio and speed rows, with optional final drive and tyre per row.