Spring Rate Calculator

This spring rate calculator works out how stiff a helical compression spring is from its wire size, outside diameter, number of active coils and material. It shows the rate in N/mm and lb/in, the force and Wahl-corrected shear stress at a deflection you choose, the solid height and how far the spring can compress before going solid, and warns when the spring index is hard to make. Paste several designs to compare them. It runs in your browser.

Shear modulus of spring materials

MaterialG (GPa)
Music wire79.3
Oil-tempered steel79.3
Chrome silicon77.2
Stainless 17-7 PH75.8
Stainless 302/30469
Beryllium copper48.3
Phosphor bronze41.4

When to use it

  1. Find the rate of a spring you have.
  2. Design a spring for a set force.
  3. Check a spring won't go solid.
  4. Compare wire sizes and coil counts.
  5. Choose between steel and stainless.

How to Use

  1. Enter wire diameter, outside diameter and coils.
  2. Choose the material.
  3. Enter free length and a deflection to check.
  4. Read rate, force, stress and solid height.

Features

  1. Rate in N/mm and lb/in
  2. Force at deflection
  3. Wahl-corrected stress
  4. Solid height
  5. Material presets
  6. Batch CSV
  7. 100% client-side

FAQs

How do I calculate spring rate?

k = G·d⁴ ÷ (8·D³·n). A 2 mm music-wire spring, 22 mm OD with 10 active coils, is about 1.98 N/mm.

What are active coils?

Coils free to deflect; with closed and ground ends it is usually total coils minus 2.

What is the Wahl factor?

A correction for the higher stress on the inside of the coil, larger for tightly wound springs.

What spring index is best?

Between about 4 and 12; outside that springs are hard to make or prone to buckling.

Is anything uploaded?

No. Everything runs in your browser.

Technical Details

Spring rate k = G × d⁴ ÷ (8 × D³ × n), where G is the wire's shear modulus, d the wire diameter, D the mean coil diameter (outside diameter − d) and n the number of active coils. Spring index C = D/d and the Wahl factor (4C − 1)/(4C − 4) + 0.615/C correct the shear stress τ = Kw × 8FD ÷ (πd³). Solid height = total coils × d and maximum deflection = free length − solid height. G values: music wire 79.3 GPa, chrome silicon 77.2, stainless 302 69, phosphor bronze 41.4.

Calculators & Converters

Calculators & Converters

  • Hydraulic Cylinder Force Calculator
  • Pipe Flow and Pressure Drop Calculator
  • Psychrometric Calculator
  • Pump Power and Head Calculator
  • Heat Exchanger LMTD Calculator
  • Welding Heat Input Calculator
  • Weld Metal and Electrode Estimator
  • Coordinate Converter (Lat/Long, UTM, DMS)